Pfaff creative 3.0, Руководство пользователя, Страница: 75 / 112

Embr
oidery mode - pr
epar
ations
7:3
Built-in designs
More than 150 designs are included in the memory
in your machine.
creative
™
(PEURLGHU\FROOHFWLRQ
Page through the
creative
™ 3.0 Embroidery
collection for all built-in designs and fonts.
The design number, stitch count (number of stitches
in the design) and the design size are displayed next
to each design. The suggested thread color for each
color number is shown.
Connect the
HPEURLGHU\XQLW
There is a covered socket behind the free-arm, see
picture. The cover will open automatically when
connecting the embroidery unit.
1. Slide the accessory tray off.
2. Slide the embroidery unit onto the free arm of
WKHPDFKLQHXQWLOLWSOXJVÀUPO\LQWRWKHVRFNHW
If needed, use the level adjusting feet so that the
machine and embroidery unit are even. If the
machine is turned off, turn it on.
3. A pop-up tells you to clear the embroidery
area and remove the hoop for positioning.
Touch OK. The machine will calibrate and
the embroidery arm will move to the ready
position. This calibration will set your
embroidery functions each time you slide on the
embroidery unit.
Make sure not to calibrate the machine with the
embroidery hoop attached as this can damage the
needle, presser foot, hoop and/or the embroidery
unit. Be sure to clear all materials from around the
machine before calibrating so that the embroidery
arm does not bump into anything while calibrating.
Remove the
HPEURLGHU\XQLW
1. To store the embroidery unit, move the
embroidery arm to park position by selecting
park position (see page 9:5) on the screen in
Embroidery stitch-out.
2. Press the button at the left, underneath the
embroidery unit (A) and slide the unit to the left
to remove it.
Note: If you switch to sewing mode you cannot start to
sew when the embroidery unit is attached.
A