
Stitch adjustments
33
Fabric
Differential feed 1.0 Adjustment
Result
Stretch fabric
(Knit, jersey)
1.0 - 2.0
Non-stretch fabric
(Chino, denim)
1.0
Lightweight fabric
(Silk, silky knit-
wear)
0.6 - 1.0
Differential feed adjustment
The differential feed system consists of two sets of feed
teeth arranged one behind the other. Both feed teeth work
independently of each other to give perfect results when
sewing on speciality fabrics. When the amount of feed by
the front feed teeth is changed in relation to the feed by
WKHUHDUIHHGWHHWKLWZLOO´VWUHWFKµRU´JDWKHUµWKHIDEULF
Use the differential feed to prevent stretching of knit
fabrics and puckering of lightweight fabrics.
For overlock stitching on normal fabric, set the
differential feed adjusting dial to 1.0.
Gathered overlock (stretch, knit fabrics)
When overedging stretch fabric, such as knits and jersey,
adjust the differential feed to a value between 1.0 and 2.0.
The setting depends on the material being sewn as well as
the desired amount of gathering. Test sew with different
settings before sewing on your garment.
Stretch overlock (lightweight fabrics)
When overedging light woven or loosely knit fabrics, such as silk and silky knitwear, adjust the differential feed to a
value between 0.6 and 1.0. When sewing, apply gentle tension to the fabric by holding the seam lightly in front and
back of the presser foot. The setting depends on the material being sewn as well as the desired amount of stretching.
Test sew with different settings before sewing on your garment.
PFAFF
coverlock 3.0
german design
2.0
1.5
1.0
0.8
0.6