Pfaff ClassicStyle Fashion 2023 Скачать руководство пользователя страница 40

3:17

0

4.0

-

2-3

-/0

Sewing

Prog.

Sewing on buttons

With Button sewing program 0 you can easily sew on two and 

four-hole buttons.

•  Remove the presser foot and lower the feed dog.

•  Mark the button position on your fabric. Place the button on 

the marked fabric.

•  Turn the handwheel towards you and position the button so 

the needle enters the left hole in the button.

•  Lower the presser foot lifter. The button will be held in 

place by the shank of the foot. Turn the handwheel to make 

sure the needle also enters the right hole of the button.

•  Continue sewing on the button. The machine will complete 

the program for you.

Buttonhole tips:

•  A wider, less dense buttonhole is recommended on heavy 

fabrics.

•  Use presser foot No. 1 for buttonholes that are to be sewn 

very close to a reinforced edge.

•  Materials that shift or stretch easily should be reinforced 

with water-soluble, tissue paper or other lightweight 

stabilizer.

•  Keyhole buttonholes are particularly stable and durable 

if a gimp thread is inserted while sewing (see "Keyhole 

buttonhole with gimp thread").

•  Linen buttonholes are particularly dense and attractive if 

you use buttonhole twist thread.

•  Buttonholes are normally selected a little larger than 

the button diameter. It is important to always sew a test 

buttonhole on the same fabric/stabilizer as your project

Содержание ClassicStyle Fashion 2023





















































Отзывы: