Pfaff ambition essential Скачать руководство пользователя страница 34

Страница: 34 / 36

Maintenance

The seam has uneven stitches

Is the thread tension correct?

Check needle thread tension and the threading.

Are you using too thick or slubbed thread?

Change the thread.

Is the bobbin thread evenly wound?

Check bobbin winding.

Is a correct needle used?

Insert a proper needle correctly, see page 19.

The machine does not feed or feeds irregularly

Did you thread the machine properly?

Check how the machine is threaded.

Has sewing lint collected between the feed

dogs?

Remove the stitch plate and clean the feed dogs with a

brush.

Have your sewing machine serviced regularly by your local authorized PFAFF® dealer!

If you have followed this trouble shooting information and still have problems, take your sewing machine

to your dealer. If there is a specifi c problem, it is a great help to test sew with your thread on a scrap of

your sewing fabric and bring it to your dealer. A sewing sample will often provide helpful information.

Non-original parts and accessories

The warranty does not cover any defect or damage caused by use of non-original accessories or parts.

Содержание ambition essential




































Результаты поиска

Содержание ambition essential

Отзывы:

Pfaff ambition essential, Руководство пользователя, Страница: 34 / 36

Результаты поиска

Содержание ambition essential

Отзывы: