Safety
1 - 1
1
Safety
1
.01
Directives
This machine was built in accordance with the European regulations listed in the Conformity
decalaration and Manufacturer’s declaration
In addition to this Instruction manual, also observe all generally accepted, statutory and other
regulations and legal requirements - also those of the country in which the machine will be
operating - and all valid environmental-protection regulations!
The regionally valid regulations of the social insurance society for occupational accidents or
other supervisory organisations are to be strictly adhered to!
1
.02
General notes on safety
●
This machine must only be operated by adequately trained operators and only after having
completely read and understood the Instruction manual!
●
The Danger and Safety instructions on the machine itself are to be followed!
●
The machine must only be used for the purpose for which it is intended and must not be
operated without its safety devices. Observe all relevant safety regulations!
●
When replacing the feed rollers or the heating wedge, when leaving the workplace
unattended, and during servicing, the machine must be disconnected from the mains by
removing the plug from the electrical socket!
●
Daily servicing work must only be carried out by appropriately trained persons!
●
Repairs and special maintenance work must only be carried out by technicians or persons
with appropriate training!
●
Work on the electrical equipment must only be carried out by electricians or appropriately
trained personnel!
●
Work is not permitted on parts and equipment which are connected to the power supply!
Exceptions to this are contained in the regulations EN 50110!
●
Modifications and alterations to the machine must only be carried out under observance of
all the relevant safety regulations!
●
Only spare parts which have been approved by us are to be used for repairs! We
expressly point out that any replacement parts or accessories which are not supplied by
us, have not been tested and approved by us. The installation and/or use of any such
products can lead to negative changes in the structural characteristics of the machine. We
shall not be liable for any damage which may be caused by non-original parts!