Pfaff 1525-g, Инструкция по эксплуатации, Страница: 39 / 58

Care and maintenance
10 - 4
6 607 Speed max. B, C 300 - 6000 ▲ ▲
660 Bobbin monitor function B, C 0 -II 0 -
0 = 0ff
l = by sensor (-926/06)
ll = by stitch counting
7 700 Needle position 0, B, C 0 - 255
Needle reference position
702 Needle position 1 (needle lowered)
on the1525 and 1526
B, C 0 - 255 80 85
on the1526-G B, C 0 - 255 25
703 Needle position 2 (take-up lever raised)
on the -900/81
B, C 0 - 255 213 234
on the -900/82 B, C 0 - 255 225
on the1525-G-900/86 B, C 0 - 255 230
705 Needle position 5 (end cutting signal 1)
on the -900/81and -900/86
B, C 0 - 255 175 186
on the -900/82 B, C 0 - 255 225
707 Needle position 6
(Start tension release signal 2)
on the1525 and 1526
B, C 0 - 255 180 192
on the1525-G B, C 0 - 255 200
727 Counter for bobbin monitoring brings B, C ON - OFF 0 -
ON= stop and signal at output Y36
OFF = signal at output Y36 without stop
760 Multiplier for the fixed value (200) for A, B, C 0 - 250 10 -
stitch count
V
See Chapter 3 Specifications
10
.05
Parameter settings
(only on machines with Quick-EcoDrive and control unit P70ED or Quick-PicoDrive and
control unit P41 PD-L)
● The selection of the user level and the alteration of parameters is described in the separa-
te instruction manual for the drive unit.
10
.05.01
Parameter list
Group
Parameter Description
Setting range
Set value P
7
0
E
D
User lever
Set value P
4
1
P
D
-L