Pfaff 1180 U Series, Дополнение к инструкции по эксплуатации, Страница: 21 / 32

21
Reset / Cold start
8 Reset / Cold start
After selecting the reset menu, by pressing the corresponding key it is possible to delete
seam parameters, to delete seam programs or to carry out a cold start.
Press and hold "+" on keys A and D and switch on the machine.
●
1 = Resetting the seam parameters
Press "+" on key A .
All seam parameters are deleted, "MASTER-RESET 1 " is displayed for a short time on the
screen.
2 = Resetting the seam programs
Press "+" on key B .
All seam programs are deleted, "MASTER-RESET 2 " is displayed for a short time on
the screen.
3 = Cold start
Press "+" on key D .
The values of the machine control unit are set back to their basic values, except the value
for the machine class. "COLD START" is displayed for a short time on the screen.
After a cold start, all programmed values are reset to their state at the time of
delivery. For this reason, after a cold start, the parameters
799, 800 and 700
must be checked and reset if necessary.
●
●
●
A D
Select Reset
1 2 3
A D
B