Setting up
15
No
VAL
760
5
TE
4
.05
Setting the stitch counting function for the bobbin thread control
●
Switch on the machine.
●
Press the
TE/Speed
key to call up the parameter input function.
●
By pressing the corresponding
+/- key
select the parameter "760".
No
●
Press the corresponding
+/- key
to set the number of remaining stitches, which can still
be sewn after recognition by the bobbin thread control function.
The selected value is multiplied by
10*
or
200**
and the result is the number of stitches.
Example display 5 x 200
**
= 1000 stitches. The setting depends among other things on
the thread strength.
●
If the
TE/Speed
key is pressed, the value is taken over and the machine changes into the
sewing mode.
The bobbin thread rest counter can only be used, if parameter "660" is set at
value "1" or "2".
*
If for parameter 660 the value is "1", the multiplier is
10
**
If for parameter 660 the value is "2", the multiplier is
200
VAL
No
VAL
101
ON
TE
A
A
Содержание 1180 series
