PF NPM15-10-120, Инструкция по установке и эксплуатации, Страница: 12 / 13

11
BURNER START UP INFORMATION & TEST DATA
The following information shall be recorded for each burner start up:
Power Flame Model Job No. Serial No.
Installation Name Start Up Date
Start Up Contractors Name Phone
Name of Technician doing Start Up
Type of Gas: Nat. LP Other
Gas Firing
Gas Pressure at Train Inlet Combustion Efficiency
Burner in Off Position “W.C. Low Fire %
Low Fire “W.C. High Fire %
High Fire “W.C.
Gas Pressure at Firing Head
Low Fire “W.C.
High Fire
“W.C.
Gas Pressure at Pilot Test
Tee “W.C.
Flame Signal Readings D.C. Volts
Micro Amps
Pilot
Low Fire
High Fire
CO
2
or O
2
(Specify)
Low Fire %
High Fire %
CO
Low Fire PPM
High Fire PPM
Input Rate
Low Fire BTU/HR
High Fire BTU/HR
Overfire Draft
Low Fire “W.C.
High Fire “W.C.
NOx (Corrected to 3% O
2
)
Low Fire PPM
High Fire PPM
Stack Outlet Test Point Draft
Low Fire “W.C.
High Fire “W.C.
Net Stack Temperature
Low Fire ° F
High Fire ° F