![PEWA QUESTemp 32 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/pewa/questemp-32/questemp-32_operators-manual_1534057004.webp)
4
1.
UP AND RUNNING
1. Make sure the wet bulb’s wick is clean. Fill the reservoir with distilled
water.
2. Place the QUESTemp in the work area in a safe location approximately 3.5
feet off the ground.
3. Turn the unit ON. If the battery voltage displayed during the power-on
sequence is less than or equal to 6.4 volts, replace or recharge the batteries.
4. Use the arrow keys to set the display to the desired items.
5. Allow 10 minutes for the sensors to stabilize to the environment before
taking readings.