manualshive.com logo in svg

PEWA AMPROBE DM-4, Руководство пользователя

Поделиться
Скачать
PEWA AMPROBE DM-4 Скачать руководство пользователя страница 41

12. MAINTENANCE

12.1 GENERAL

The DM-4 is a precision instrument. For its’use and storage, follow the recommendations

and instructions contained in this manual in order to avoid possible damages. Never use

the instrument in environments with a high humidity or temperature. Always turn off the

instrument if it is not in use.
12.2 BATTERY REPLACEMENT

When the battery indicator indicates less than 50% ( 

q 

), the batteries must 

be replaced.

m

1) Disconnect cables and clamps from the circuit under test.

2) Turn the instrument off by pressing ON/OFF push button.

3) Remove the cables from the input terminals.

4) Unscrew the screw of the battery cover and remove the cover.

5) Replace the batteries with 8 new 1.5 V - AA.

(Alkaline LR6 is strongly recommended.)

6) Reposition the cover and fasten it with the proper screw.

12.3 CLEANING

Use a soft dry cloth to clean the instrument. Do not use wet clothes, solvents, 

water and so on.

40

DM-4 Power Quality Recorder

CAUTION

Only qualified technicians should operate the instrument. Before

replacing the batteries, disconnect the test leads from circuit under

voltage in order to avoid electrical shocks.

    

 

 

 

        

Содержание AMPROBE DM-4



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды