Pevino PI24S-BP, Руководство пользователя

Страница: 4 / 69

4
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than
those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless
they are of the type recommended by the manufacturer.
WARNING: If you do not use the machine for a long time, please unplug the power plug from the socket or
switch off the power supply.
WARNING:This appliance is not intended for use by persons (including children)
with reduced Physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
for their safety;
WARNING:Children should be supervised to ensure that they do not play with the appliance;
WARNING:Do not use extension cords or ungrounded (two prong) adapters;
WARNING:If the supply cord is damaged, it must be replaced by the manufacturer,
Its service agent or similar qualified person in order to avoid hazard.
KEEP THESE INSTRUCTIONS FOR ANY FUTURE USE
BEFORE LOADING AND PLUGGING IN THE WINE COOLER
Before using your wine cooler
•
Remove the exterior and interior packaging.
•
Before connecting the wine cooler to power source, let it stand upright for approximately 6 hours. This
will reduce risk of a malfunction in the cooling system from handling during transportation.
•
Clean interior surface with lukewarm water by using a soft cloth.
•
When replacing the illuminating lamp, please select a lamp similar to the original. Shut off the power
supply before replacing the lamp.
Installation of your wine cooler
•
Place your wine cooler on a surface strong enough to support it when fully loaded. Level your wine
cooler by adjusting the levelling legs at the bottom front of the wine cooler.
•
Place the wine cooler away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct
sunlight may affect the acrylic coating and heat sources may increase energy consumption.
•
Extreme cold ambient temperatures may also cause the unit not to perform properly.
•
Avoid locating the unit in moist areas.
•
Plug the wine cooler into a properly installed wall outlet with an earth/ground connection plug. Any
questions concerning power should be directed toward a certified electrician or an authorized products
service center.
Pay attention to this
•
Store wine in sealed bottles.
•
Do not overload the wine cooler.
•
Do not open door unless needed.
•
Do not cover shelves with aluminium foil or any other material that may prevent air circulation.