Designed
temperature range
for CC248S-SD-1 /
CC248S-GD-1:
5-20
°
C
t’s recommended that you install your wine cooler in a place where the ambient temperature is between
10-38°C. If the ambient temperature is above or below recommended temperatures, the performance
of the wine cooler will be affected and it may not be possible to obtain temperature between 5-20
°
C
Installing your wine cooler:
•This wine cellar is designed for free-standing installation.
•Position it in a place with sufficient strength to support its weight when loaded. To ensure that it is
level,adjust the height of the feet underneath.
•To get the best from your appliance with the lowest energy consumption, do not place the appliance
close to a heat source (heater, cooker, etc.), do not expose it to direct sunlight, and do not place it in a
room which is too cold.
•
Good ventilation is required around the appliance, in order to dissipate the heat properly and to
guarantee efficient cooling operation at low power consumption. Sufficient clearance is necessary.
- Gap to the back and to the side walls each approx. 10 cm;
- Place the appliance so that the appliance door can open without being impeded.
• Only install at a location with an ambient temperature suitable for the climate class of the appliance.
This will prevent any movement due to instability, generating noise and vibration, and will ensure
that the door seals perfectly
Control panel:
Important note: After selecting the desired temperature, the display will continue to
show the real temperature inside the equipment, which will vary gradually until it reaches
Climate class
Symbol
Ambient temperature
range
Extended
temperate
SN
From +10°C to +32°C
Temperate
N
From +16°C to +32°C
Subtropical
ST
From +16°C to +38°C
Tropical
T
From +16°C to +43°C
