PEUGEOT 306 2002, Руководство пользователя, Страница: 47 / 131

70
YOUR 306 IN DETAIL
RADIO
Notes on radio reception
Your car radio receiver is subject to phenomena which do not affect domestic sets. Both MW/LW and FM recep-
tion are subject to various forms of interference which are not a reflection on the quality of your set, but are due
to the nature of the signals and the way in which they are transmitted.
On MW/LW, interference may be noticed when passing underneath high voltage power lines or bridges or in
tunnels.
On FM, interference may be the result of distance from the transmitter, reflection of the signal by obstacles (moun-
tains, hills, buildings etc), or of being in an area which is not covered by a transmitter.
Selecting the radio
Press the "J" button.
Selecting a waveband
By short presses on the “J” button, you can select the FM1, FM2, FM3 and AM wavebands.
Automatic station search
Briefly press button “G” or “H” to search for the station immediately above or below. By continuing to press the button
in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops on the first station found immediately after you release the button.
If TA, traffic information programme, is selected, only stations broadcasting this type of programme are selected.
Searching for a station occurs first in “LO” sensitivity (selection of the most powerful transmitters) during
scanning of the waveband, then in “DX” sensitivity (selection of the weakest and most distant transmitters).
To scan the waveband in “DX” sensitivity, press twice on button “G” or “H”.
Manual station search
Press the “MAN” button.
Briefly press button “G” or “H” respectively to increase or reduce the frequency displayed.
By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
Scrolling stops as soon as you release the button.
Pressing the “MAN” button again returns you to automatic station search.