PEUGEOT 207 CC, Руководство пользователя

Страница: 96 / 232

5
!
i
CHILD SAFETY
94
The incorrect installation of a child
seat in a vehicle compromises the
child's protection in the event of an
accident.
For information on the possibilities
for installing ISOFIX child seats in
your vehicle, refer to the summary
table.
"ISOFIX" MOUNTINGS
There are three rings for each seat:
- two rings A , located between the
vehicle seat back and cushion, indi-
cated by a marking,
- a ring B behind the seat for fi xing
the upper strap, referred to as the
Top Tether .
The top tether is used to secure the up-
per strap of child seats that have one.
This arrangement limits the forward tip-
ping of the child seat in the event of a
front impact.
This ISOFIX mounting system provides
fast, reliable and safe fi tting of the child
seat in your vehicle.
Your vehicle has been approved in ac-
cordance with the latest ISOFIX regu-
lation .
The seats, represented below, are fi tted
with regulation ISOFIX mountings:
The ISOFIX child seats are fi tted with
two latches which are secured on the
two rings A .
Some seats also have an upper strap ,
known as the Top Tether, which is at-
tached to ring B .
To secure the child seat to the top tether:
- remove and stow the head restraint
before installing the child seat in
this seating position (refi t it once the
child seat has been removed),
- pass the strap of the child seat over
the top of the seat backrest, centred
between the apertures for the head
restraint rods,
- fi x the hook of the upper strap to the
ring B ,
- tighten the upper strap.
Follow the instructions for fi tting
child seats contained in the seat
manufacturer's installation guide.