PEUGEOT 2014 3008, Руководство пользователя

Страница: 26 / 214

1
Monitoring
27
Coolant temperature gauge
With the engine running, when the needle is:
-
in zone A , the temperature is correct,
- in zone B , the temperature is too high;
the max temperature warning lamp 1 and
the central STOP warning lamp come on,
accompanied by an audible signal and a
message in the screen.
After driving for a few minutes, the temperature
and pressure in the cooling system increase.
To top up the level:
F
wait for the engine to cool,
F
unscrew the cap by two turns to allow the
pressure to drop,
F
when the pressure has dropped, remove
the cap,
F
top up the level to the "MAX" mark.
You must stop as soon as it is safe to do so.
Wait a few minutes before switching off the
engine.
Contact a PEUGEOT dealer or a qualified
workshop.
Warning lamp is on Cause Action / Observations
Directional
headlamps flashing. The directional headlamps system
has a fault. Have it checked by a PEUGEOT dealer or a qualified
workshop.
Under-inflation fixed. The pressure in one or more wheels
is too low. Check the pressure of the tyres as soon as possible.
This check should preferably be carried out when the
tyres are cold.
+ flashing then fixed,
accompanied by the
Service warning lamp. The tyre pressure monitoring system
has a fault or no sensor is detected
on one of the wheels. Under-inflation detection is not assured.
Have the system checked by a PEUGEOT dealer or a
qualified workshop.