9
73
PRACTICAL INFORMATION
Third brake lamp
(Four W 5 W bulbs)
Unscrew the 2 fi xing bolts
A
.
Release the lamp unit by pushing
the two tabs
B
inwards.
Disconnect the connector and the
rear wash-wipe pipe.
Remove the bulb holder.
Remove the bulb and change it.
When refi tting, proceed in the reverse
order and ensure that the lamp unit
seal and the rear wash-wipe pipe have
been put back in place correctly.
Do not tighten the bolts more
than is necessary at the risk
of breaking the light.
Number plate lamps (W 5 W)
Pass your hand under the bumper.
Remove the bulb holder turning it
one quarter of a turn.
Remove the bulb and change it.
remove the bulb holder by
spreading the four tongues
B
,
remove the bulb and change it.
Note:
when refi tting, proceed in the
reverse order and take care to posi-
tion the bulb holder, the tabs and the
lamp unit correctly.