2
C69SFA SEQUOIA SWING C695050D (080610)
Field of application
1
Arborist harness with rigid seat
conforming to the EN 813: 2008
standard (seat harnesses)
including EN 358: 2000 lateral
attachment points (Work
positioning and Travel restraint).
This product must not be loaded
beyond its strength rating, nor be
used for any purpose other than
that for which it is designed.
WARNING
Activities involving the use of
this equipment are inherently
dangerous.
You are responsible for your own
actions and decisions.
Before using this equipment, you
must:
- Read and understand all
instructions for use.
- Get specific training in its proper
use.
- Become acquainted with its
capabilities and limitations.
- Understand and accept the risks
involved.
Failure to heed any of these
warnings may result in severe
injury or death.
Responsibility
WARNING, specific training in the
activities defined in the field of
application is essential before use.
This product must only be used
by competent and responsible
persons, or those placed under
the direct and visual control of a
competent and responsible person.
Gaining an adequate apprenticeship
in appropriate techniques and
methods of protection is your own
responsibility.
You personally assume all risks
and responsibilities for all damage,
injury or death which may occur
during or following incorrect use
of our products in any manner
whatsoever. If you are not able, or
not in a position to assume this
responsibility or to take this risk, do
not use this equipment.
Only the techniques
shown in the diagrams
that are not crossed out
and/or do not display
a skull and crossbones
symbol are authorized.
Check our Web site
regularly to find the
latest versions of these
documents:
www.petzl.com
Contact PETZL if you
have any doubt or
difficulty understanding
these documents.
2
Nomenclature of parts
(1) Belt, (2) Thigh straps, (3) FAST rapid buckles, (4) Rigid seat, (4bis) Seat width adjustment
extensions (5) “D” lateral attachment points, (6) Attachment bridge, (7) Gated rings, (8) Bridge
height adjustment straps, (9) Seat height adjustment straps, (9 bis) DoubleBack buckles,
(10) Strap retainer, (11) Saw holder, (12) Equipment loops, (13) Adjustable elastics, (14) Tool
holder retainer, (15) Marking label, (16) Rigid seat rapid adjustment system, (17) Lateral thigh
padding.
Principal materials
Polyester, nylon, polyethylene, steel, aluminum alloy.
1
5
6
7
3
4
11
14
12
3
8
2
13
8
7
5
10
9 bis
9
6
4 bis
15
17
16
16
