PETSPY PREMIUM DOG TRAINING COLLAR
Dear Customer, thank you very much for choosing the PetSpy Brand! It’s our pleasure
to serve you and your beloved dog. Our mission is to ensure your pet’s safety and hap-
piness by providing you with the tools and techniques to successfully train your dog.
If you have any questions, please contact PetSpy Customer Service at
we will be happy to assist you!
1. Antenna - transmits an electromagnetic signal to
receiver collar. You can screw it off when needed.
2. Knob Switch - rotate the knob with your thumb to
turn the remote on. It also allows you to quickly switch
between different stimulation levels of Shock and Vibra-
tion.
Outer numbers 0-8:
indicate the stimulation intensity.
Inner numbers 20-100:
show the percentage from the
maximum level of intensity.
3. Continuous Shock Button - press the button to
deliver continuous Shock to the collar. It will keep
shocking your pet while you holding the button. It will
stop automatically after 10 seconds to avoid injury.
4. Convulsive Shock Button - press the button to deli-
ver a short impulse of Shock to the collar. Unlike the
continuous shock, the convulsive shock is limited to 1
second even if you keep holding the button.
5. Vibration Button - press the button to deliver Vibra-
tion stimulation to your pet. Similar to the continuous
Shock, the vibration will stop automatically after
10 seconds even if you keep holding the button.
6. Tone/Beep Button - press the button to send an audi-
ble tone/beep to the receiver collar. When your dog is
well trained, the tone button is all you need to effectively interact with dog.
7. Channel Switch - if you have 2 collars, slide the channel switch to choose between
collar 1 and collar 2. Note that one collar can only work with one channel. Please refer
to
Synchronizing Remote Transmitter with Receiver Collar
paragraph to learn how you
can reprogram the system.
8. LED indicator - It flashes green every 3-4 seconds when remote is turned on. A solid
green light goes on when you press and hold any stimulation button. LED also serves
as a battery charge indicator: the LED is red while remote is charging, it will turn green
when battery is fully charged.