5
DE
IT
NL
ES
FR
EN
Replacement fl aps available online
b) In Walls
Follow the instructions for “Wood and PVC/uPVC/Metal” by using the
enclosed cutting template. Please note that additional tools, materials and
competent DIY skills may be required.
FOR SAFETY REASONS IT IS NOT RECOMMENDED TO FIT THIS
PRODUCT TO GLASS.
Fitting your pet door
Your PetSafe
®
pet door is fi tted with the closing panel
on the inside of your house.
FIG.4
Temporarily, hold the inside frame
(with fl ap) in position and mark
the screw holes with a pencil.
FIG.5
Remove frame and using
a 7mm (1/4”) drill bit,
drill holes as indicated.
FIG.6
Fit outside frame in cut-out and
place threaded sleeves through
holes in frame and door. Place
inside frame in cut-out. Thread
plastic screws through holes in
frame (do not overtighten). Cut
off excess plastic screws, being
careful not to damage the outer
frame / sleeve.
Remove if necessary.
Fitting and adjusting the
fl exible fl ap
Fits brick walls
Your PetSafe
®
pet door is now ready to use.
FIG.7
The fl exible fl ap is
adjustable to fi t into
frame correctly.
FIG.8
Horizontal
adjustment
Move fl ap left or right
to adjust position.
Tighten screws
when correct.
FIG.9
Vertical
adjustment
Move fl ap up or down
to adjust position.
Tighten screws
when correct.
Outside Frame
Inside Frame
Plastic Screws (4 pcs.)
Sleeves (4 pcs.)
