+1 (800) 732-2677
8
Test the SSSCAT
®
Unit
• Turn the SSSCAT
®
unit on by sliding the switch
to the left (“
I
” position), and wait about 2
minutes for it to normalize.
• You can test it by waving your hand from side
to side in front of it.
Choose a Location
• Place the SSSCAT
®
unit near an area that you
would like your pet to avoid, such as a trash
can or a doorway.
• Choose a location where the temperature is
between 60 °F and 80 °F.
• To prevent false activations, do not place the
unit in direct sunlight or in close proximity to
HVAC vents.
• To prevent false activations, do not point
the sensor toward a wall or an object that
is in direct sunlight or in close proximity to
HVAC vents.
• Position the unit for the pet to pass the sensor
instead of walking directly towards it.
• The spray range is about 39 in. from the unit.
Care and Cleaning
• Turn the unit off by sliding the switch to the right
(“
O
”
position) before cleaning it.
• Use a cloth with warm, soapy water to clean
the nozzle monthly.
• Do not submerge the unit under water.
