www.petsafe.net
5
Operating Guide
Prepare the Remote Transmitter
To Insert and Remove the Battery
1. Remove the screws on the back of the Remote Transmitter.
2. Insert the 9-volt alkaline battery.
3. Reinstall the screws. Do not over-tighten the screws.
2
1
To verify the battery has been inserted correctly:
1. Press any button on the Remote Transmitter.
2. The Transmitter Indicator Light should glow.
3. If the Transmitter Indicator Light still does not come on, contact the Customer Care
Center at 1-800-732-2667.
_____________________________________________________________
Prepare the Receiver Collar
To Insert and Remove the Battery
1. Remove the screws with a small
Phillips Screwdriver (
2A
).
2. Remove the Battery Lid (
2A
).
3. Install one (1), 6-volt battery
(
2B
).
4. Replace the Battery Lid.
5. Reinstall the screws (
2B
). Do
not over-tighten the screws.
A replacement battery (6-volt,
RFA-18) can be found at many
retailers. Contact the Customer
Care Center at 1-866-381-
2785 or visit our website at
www.guardianpet.net to locate a
retailer near you.
5B
5C
Step
1
Step
2
