6
Customer Care Center 1-800-732-2677
www.petsafe.net 7
Step
6
Train Your Pet
6A
6A Rehang your door and begin training your pet.
Tape the flap open to help your pet become familiar
with the opening.
Helpful Tip:
Try treats to encourage your pet to
go through the pet door and become comfortable
using it.
Step
5
Install Pet Door
Before putting away the jigsaw, place the interior frame (frame with
the flap) inside the cut out and check the fit. Then, place the exterior frame into the
underside of the door to check the fit. If frames do not fit inside the opening, you may
need to recut to square opening before proceeding with installation.
Helpful Tip:
Tape the flap up to keep it out of the way during the installation.
Optional
5A
5B
5C
5D
5A Place interior frame (frame with flap) into cutout.
Next place exterior frame into cutout from underside
of door, aligning core covers into tabs of frame. Hold
frame together with one hand.
5B Drop nylon screws through holes in frame then
thread hex nut to bottom of each screw. While
continuing to hold frames, tighten screws until frames
come together.
Optional:
Caulk around the exterior frame
(frame without the flap) and inside threshold
where core covers meet for weather
resistance.
5C Use a screwdriver to evenly tighten screws
throughout frame while keeping core covers in
position. It may be necessary to adjust screws
to make sure pet door fit is correct.
5D Cut off excess screws length with wire cutters.
Hold wire cutters flush with frame for a clean,
level cut.
Helpful Tip:
Any rough edges of nylon screws left by
wire cutters can be removed with a metal file.
IMPORTANT
Use a manual screwdriver to tighten the screws. Do
not overtighten. Overtightening can strip the thread
off the screws or bow the pet door frame.
Replacement Flaps
To Replace remove screws
from the interior frame of
pet door.
To Adjust slightly loosen
screws from interior frame
of pet door.
Replace & Adjust
During extreme changes in weather, vinyl flaps can shrink during cold months and stretch in warmer
months. Easily replace or adjust to ensure a snug fit during seasonal changes.
Remove bar and flap.
Slightly move metal bar
away from flap.
Replace new vinyl flap and
position horizontally and
vertically to fit into door
frame. Replace existing bar
and tighten screws in place.
Adjust flap horizontally
and/or vertically to fit
into door frame. Push bar
towards flap and tighten
screws in place.
1
3
2
Replacement Parts
Plastic Door Size
Replacement Flap Part Number
Small
PAC11-11037
Medium
PAC11-11038
Large
PAC11-11039
Extra Large
PAC11-11040
Replacement flaps can be purchased
by visiting www.petsafe.net or by
contacting our Customer Care Center
at 1-800-732-2677.
