Petsafe PDT00-12470, Руководство по эксплуатации и обучению

Страница: 15 / 24

www.petsafe.net 15
The “Stay” Command
1. Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar, and attach a
long leash. Note: Be sure the extra collar does not put pressure on the Contact Points.
2. Visibly identify where you want your pet to sit by placing his bed or a large piece of cloth on the
ground.
3. Put your pet on his bed. Hold your leash in one hand and the Handheld Transmitter in the
other.
4. Staying at approximately 1 yard, walk around the perimeter of the bed. Do not say anything to
your pet.
5. If your pet tries to leave the bed, press and hold the Negative Tone Button while saying “Stay”
and if necessary guide your pet back to his bed.
6. Immediately release the Negative Tone Button as soon as your pet returns to his bed, and praise
him enthusiastically.
7. Once your pet has settled, release him and play calmly.
8. Repeat steps 3 to 7 several times.
9. If your pet stays reliably on receiving the spoken “Stay” command, then training is complete.
Release your pet and praise him. If not, move on to Step 10.
10. Put your pet on his bed and walk around the perimeter of the bed as before.
11. Wait for your pet to try to leave the bed. Using the Recognition Level for your pet, press and
hold the Negative Tone and Stimulation Button while saying “Stay” and if necessary guide your
pet back to his bed.
12. Immediately release the button as soon as your pet returns to his bed, and praise him
enthusiastically.
13. Once your pet has settled, release him and play calmly.
14. Repeat steps 10 to 13 several times.
15. If your pet stays reliably on receiving the spoken “Stay” command, he may now be ready to
respond without Stimulation. Take a play break and then go back and repeat from Step 3 with
Negative Tone only.