
6
1-800-732-2677
Operating Guide
Prepare the Remote Transmitter
Charge the Remote Transmitter
Lift the rubber cover protecting the Remote
1.
Transmitter Charging Jack.
Connect one of the charger connectors to the
2.
Remote Transmitter Charging Jack.
Plug the charger into a standard wall outlet.
3.
Charge the Remote Transmitter for 5 hours for the
4.
fi rst charge. Recharges take only 3-4 hours.
Note:
The Battery Indicator will scroll while charging and will
become solid when fully charged.
When charging is completed, replace the rubber cover.
5.
Note: Approximate battery life between charges is 40 to 60
hours, depending on frequency of use.
Charger
connector
placed in the
Handheld
Transmitter
Charging Jack
Turning ON the Transmitter
Power up the Transmitter by pressing any button. You will see the display turn on when
you press any button.
Transmitter Digital Display
The display stays on for 10 minutes after a button press. After 10 minutes with no button
presses, the display shuts off and the transmitter goes into battery conservation mode.
Pressing any button will cause the display to turn back on. The various symbols you might
see on the display are explained below.
Numeric
readout
Shows the chosen stimulation level for Dog 1 or
Dog 2.
Dog 1/ Dog 2
The symbol displayed is the active dog receiver
collar. See Two Dog System on page 10.
Tone or
Stimulation
When pressing Tone or Stimulation the Dog 1 or
Dog 2 symbol will appear in bold or emphasized.
Battery
Indicator
The battery indicator provides constant
awareness of your battery’s power level.
See
Battery Indicator on page 7 for more detailed
information on the Battery Indicator.
Note:
Factory preset is for Dog 1 mode, you will not see the Dog 2 symbol unless the unit is
programmed for Dog 2 (see Two Dog System on page 10.)
Step
1