4
Customer Care 1 (800) 732-2677
In the Box
Bark Collar
USB Charger
Test Light
Tool
How it Works
The PetSafe
®
Rechargeable Bark Collar uses several features designed to shorten the training phase and
promote good behavior.
First, the bark collar has a unique sensor that provides the most reliable bark detection available. It also
uses temperament learning to decrease and, in most cases, eliminate nuisance barking.
The system has 15 levels of static correction. It begins with low-level corrections. If excessive barking
continues, the correction intensity will increase with each successive bark until the barking stops. Once
the dog has learned to reduce the barking, the initial warning corrections are reduced. As a built-in
safety feature, if your dog barks 15 times or more within a 1 minute 20 second period, the bark collar will
automatically shut off for 3 minutes.
Lite
PetSafe
®
Lite Bark Collars are designed specifically for dogs with a sensitive or timid personality. The
stimulation levels are very gentle even when increasing to higher levels. Lite bark collars can be used with
dogs of all sizes, but they are particularly well suited for small to medium-sized dogs.
Charge the Collar
Excessive charging can shorten battery life. Only charge the collar when you see the low battery light.
1. Lift the cover protecting the charging port and connect the charger.
2. Plug in and fully charge the collar. This can take up to 5 hours.
3. When fully charged, the green LED on the collar will turn off. When the bark collar is charged, replace
the rubber cover.
To Turn the Collar On
Press and hold the power button until you hear a low to high beep and
the green LED appears, and then release. The green LED will flash once
every 5 seconds.
To Turn the Collar Off
Press and hold the power button until the bark collar beeps high to low,
and then release. The red LED will be illuminated during the button press
and will turn off when the bark collar turns off.
Charging Port
Power/LED
