Petsafe PBC00-11283, Руководство по эксплуатации

Страница: 7 / 16

petsafe.com 7
To Re-Thread the Spray Collar
• The slide buckle prevents the Spray Collar from becoming loose around your pet’s neck.
• The ridges must be facing up; the Spray Collar will slip if it is not properly threaded.
Ensure a Proper Spray Pattern
For the Spray Collar to perform properly, the nozzle must be
positioned correctly and there must be a clear path from the Spray
Nozzle to your dog’s snout. Follow these steps:
1. Make sure the PetSafe
®
logo on the front of the unit is upright
and the Spray Nozzle is angled out and pointing up towards the
dog’s snout.
2. For long-haired dogs, it may be necessary to trim the neck
hairs along the path of the spray. It is important that the spray
reaches the dog’s snout to be effective.
Do not shave the pet’s neck as this may
increase the risk of skin irritation.
On/Off Battery Module
The Elite Little Dog Spray Bark Control Collar is packaged with the
battery module installed in the
OFF position. To turn on the Spray
Collar, use a coin to turn the Battery Module counter clockwise
until the line on the battery lines up with the ON position ( E) and
the green LED begins blinking. It is very important that the line on
the battery lines up precisely with the ON position to ensure that
the Spray Collar is working. If the Spray Collar is not going to be
used on the dog immediately, leave the battery module in the
OFF position.
Ridges
Slide buckle
ON OFF
E