16
Customer Care Center 1-800-732-2677
Compliance
FCC/Canada
This Class B digital apparatus complies with Canadian ICES-003. This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a residential environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
guide, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a practical installation. If this equipment causes harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Relocate the interfered receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different to that to which the receiver is connected.
•
Contact the Customer Care Center at 1-800-732-2677.
•
This device complies with Industry Canada Rules. This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Unauthorized changes or modifi cations to the equipment, not approved by Radio Systems
®
Corporation, could result in not meeting compliance with FCC regulations and could void the
user’s authority to operate the equipment.
Australia
This device complies with the applicable EMC requirements specifi ed by the ACMA (Australian
Communications and Media Authority).
Customer Care International
United States / Canada: 1-800-732-2677
Australia: 1800 786 608
New Zealand: 0800 543 054
Caution
This System is NOT a solid barrier. The system is designed to act as a deterrent, using Static
Correction to condition pets to remain outside of the established barrier area. It is important
that you reinforce training with your pet on a regular basis. Since the tolerance level to Static
Correction varies from pet to pet, Radio Systems
®
Corporation CANNOT guarantee that the
system will in all cases keep a pet outside of the established barrier area. Not all pets can be
trained to avoid entering the barrier area. Therefore, if you have reason to believe that your pet
may harm himself or pose a danger to others if he is not kept from entering the barrier area,
you should NOT rely solely upon this system to restrict your pet. Radio Systems
®
Corporation
shall NOT be liable for any personal injuries, property damage, injury to or death of your pet,
economic loss or any consequential damages sustained as a result of any animal entering the
barrier area.
Содержание Pawz Away
Страница 18: ...18 Customer Care Center 1 800 732 2677 ...
Страница 19: ...www petsafe net 19 ...
