Petsafe Pawz Away ZND-1200, Руководство по эксплуатации и обучению, Страница: 15 / 20

www.petsafe.net 15
Accessories
To purchase additional accessories for your PetSafe
®
Pawz Away
®
Indoor Pet Barrier, contact the
Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net to locate a
retailer near you.
Component Part Number
Battery – 3 Volt Lithium (two pack - size CR2032) RFA-35-11
Replacement Strap RFA-308
Extra Receiver Collar RFA-377
Extra Barrier Transmitter ZND-1000
Replacement Short and Long Contact Points RK-17
Receiver Collar Battery Door RFA-394
Troubleshooting
Barrier Transmitter does not
appear to work. Check segment indicator on Barrier Transmitter. •
Check/replace batteries in Barrier Transmitter. •
Increase the Barrier Area range on the Barrier •
Transmitter.
Check that the Barrier Transmitter setting corresponds •
to the Receiver Collar setting. (i.e. Barrier Transmitter
is set to mode A and Receiver Collar is synchronized to
pick up mode A)—refer to Additional Features section
beginning on page 11 for instructions.
Barrier Area range is too low. Check/replace batteries in Receiver Collar. •
Adjust Barrier Transmitter range to increase Barrier •
Area size.
Barrier Area range is too high. Adjust Barrier Transmitter range to decrease Barrier •
Area size.
Pet seems to receive no
stimulation.
Check/replace batteries in Receiver Collar. •
Use Test Light Tool to check for static correction. •
Check Receiver Collar fi t to ensure Contact Points have •
direct skin contact.
Check the setting on the Barrier Transmitter. •
Unable to hear Receiver Collar
tone. Check/Replace batteries in Receiver Collar. •
Pets easily hear tone but it may be a volume level that is •
diffi cult for you to hear.
Use the Test Light Tool to check Receiver Collar for •
static correction.
No segments on Barrier
Transmitter. Press the UP (+) arrow button. •
Check/replace batteries in Barrier Transmitter. •