www.petsafe.net
11
*All Mini Pet Barriers and Receiver Collars are preset to mode A. The A and
B mode feature is designed to be used in multiple pet households where
you may want one pet to be able to access an area while preventing access
by another pet. For single pet households, you will not need to operate
the Barrier Transmitter in any mode other than A. Please see the Additional
Features section of this operating and training guide (beginning on page 13)
for instructions on how to utilize mode A and B.
Test the Barrier Area
1. Keeping your hands away from the
Contact Points, use the edge of the Test
Light Tool to turn the receiver battery
door to the ON position.
2. Hold the Receiver Collar with the Contact
Points facing up. Place the Test Light
Tool on the Contact Points so that the
wire in the Test Light Tool touches the
Contact Points (
3A
). The PetSafe
®
logo
on the Receiver Collar should face the
Transmitter.
3A
Step
3
