3
2
Table of Contents
Important Safety Instructions.............................................
Components.......................................................................
Operating Instructions........................................................
Filters & Fountain Cleaning................................................
Pump Maintenance............................................................
Fountain Reassembly.........................................................
The Fountain & Your Environment.....................................
Manufacturer’s Safety Instructions.....................................
1
2
3
6
8
9
11
12
1) Carefully remove all the fountain components from the packaging
and set aside prior to assembly.
2) As with any electrical device, check the electrical cord for any tears
or damage before use.
3) Place the foam filter around the pump by inserting the pump into the
filter from the top, make sure the cord rests on top of the filter (Fig.1).
DO NOT RUN DRY - FOR INDOOR HOUSEHOLD USE ONLY
Bowl
Pump
70 oz. Capacity
Charcoal
Filter
Components
Adaptor
Rubber
Grommet
Tower
AVALON FOUNTAIN
Thank you for choosing the PetSafe
®
brand. You and your pet deserve a
companionship that includes memorable moments and a shared understanding
together. Our products and training tools promote a lifestyle of protection, teaching
and love; essentials that influence memories for a lifetime. If you have any questions
about our products or training your pet, please visit our website at www.petsafe.net or
contact our Customer Care Center at 1-800-732-2677. Please register your product
within 30 days of purchase at www.petsafe.net.
Operating
Instructions
Rubber
Cap
Filter Housing
Case
Inline Plug
Fig. 3
Fig. 2
Pump
Outflow
Top
Bottom
Foam
Filter
Cord rests
on top
Fig. 1
4) Take the bowl and place
the pump inside the square
indention. Make sure the
circular opening on top of
the pump is positioned in the
bottom right corner of the
square (Fig. 2). The foam filter
will be slightly compressed
between the pump and the
post. Press down on the pump
to engage the suction cups.
Once the pump is securely in
place, feed the cord over and
through the raised post and out
the notch on the bottom side of
the bowl (Fig. 3).
