+1 (800) 732-2677
6
5
5. Take the pump apart by first removing the
faceplate. You may need to use a fingernail to
pry it off.
6
6. Remove the teardrop shaped stator by pulling up
on the small lip.
7
7. Use a fingernail to pull out the impeller, which is
held in place magnetically.
8. Rinse all fountain components (except for the
adaptor) with warm water before using the pet
fountain. This will remove any residue from the
manufacturing process.
9. Reassemble the fountain.
10
10. Rinse the carbon filter and insert it into the housing
with the black side facing the pump.
11. Pick up the fountain by the bowl and place it in
a desired location. Pour water into the bowl and
the housing. Leave a ½ in. of space between the
water level and the rim of the bowl.
