Petsafe Deluxe PDBC-300, Руководство по эксплуатации

Страница: 5 / 16

www.petsafe.net 5
How the PetSafe
®
Deluxe Bark
Control Collar
™
Works
The Deluxe Bark Control Collar ™ has a unique patented sensor technique that provides the most
reliable bark detection available. The Bark Control Collar uses both vibration and sound sensors
to discriminate each bark from other external noises. A Static Correction is administered through
the Contact Points only if both the vibration from the vocal cords and the sound from the bark
match the bark sampling criteria. The Bark Control Collar starts with the lowest level of Static
Correction in each Mode and then increases through 6 levels each time your dog barks within 30
seconds of the previous bark. If your dog does not bark again within 30 seconds, the Bark Control
Collar will reset itself to the lowest level of Static Correction in the current Mode. Along with each
Static Correction, the LED Indicator Light will flash. As a built-in safety feature, if your dog barks
15 times or more within a 50-second period, the Bark Control Collar will automatically shut off for
3 minutes.
Key Definitions
Mode Push-button: Adjusts the levels of Static
Correction your dog receives when barking. This
push-button is also used to turn the Bark Control
Collar off, and to test it.
Indicator Light: Indicates that the Bark Control
Collar is functioning properly in the Test Mode.
This light also serves as a low battery indicator.
Sound Activated Sensor: Detects the sound of
your dog’s bark.
Sensor Probe: Detects the vibrations of your
dog’s bark.
Note: The Sensor Probe is not adjustable.
Contact Points: Deliver the safe Static
Correction.
Battery
Mode
Push-
button
Indicator
Light
Sound
Activated
Sensor
Contact Points
Washers
Sensor Probe
Fit the Bark Control Collar
Important: The proper fit and placement of your Bark Control Collar is important for
effective operation. The Contact Points must have direct contact with your dog’s skin on
the underside of his neck.
To assure a proper fit, please follow these steps:
Make sure that the battery is not installed in the Bark Control Collar. 1.
Start with your dog standing comfortably. 2.
Place the Bark Control Collar on your dog’s neck close to the ears. Center 3.
the Contact Points underneath your dog’s neck, touching the skin.
Note: It is sometimes necessary to trim the hair around the Contact Points to
make sure that contact is consistent.
YES
NO