Petsafe Comfort-Fit Deluxe bark control, Полное руководство

Страница: 9 / 12

www.petsafe.net 9
Regular Maintenance
• Check Contact Points for tightness weekly
Note: Do not adjust the factory preset Sensor Probe.
• Clean Contact Points with alcohol weekly
Note: Remove the battery and discharge the Bark Control
Collar before touching the Contact Points.
• Check your dog’s neck for irritation and wash neck
weekly.
____________________________________________________________________
To Test the Bark Control Collar
Important: To avoid feeling the Static Correction yourself, never touch
the two Contact Points simultaneously.
1. Turn the Mode Switch to TEST.
2. Hold the unit by the collar with the Indicator Light
facing towards you. The unit should be within 6-10
inches of your mouth.
3. In order to trigger the unit, say “Test” loudly into the
Sound Activated Sensor.
4. The Indicator Light will fl ash three times to show that it
is functioning properly.
5. If the Indicator Light does not fl ash, ensure that the
OFF
TEST
LOW
BAT
test
off
TEST!
battery is properly installed, and/or replace the battery. If the Indicator Light
still does not fl ash, contact the Customer Care Center at 1-800-732-2677.
6. Return the Mode Switch to Low before replacing the Bark Control Collar
on your dog.
Note: The TEST Mode is not intended for normal operation. If the Bark Control
Collar is left in TEST Mode while on your dog, it can cause false correction and may
reduce battery life.