Peterbilt 365 2017, Руководство пользователя

Страница: 139 / 228

SWITCHES
Windshield Wipers/Washer
Your vehicle is equipped with a
two-speed, intermittent windshield
wiper system. The windshield wiper
system is integrated with the exterior
lights so that the low beam headlights
will turn on when the windshield wipers
turn on. To override this function, turn
the headlights on and then off again
and the low beams will turn off. A
seven-position rotary wiper switch
(located on the turn signal lever)
operates the windshield wipers and
washer. Rotate the end of the turn
signal lever to change the wiper mode.
NOTE
The ignition key must be turned to
ON or ACC for the wiper/washer
switches to operate.
Wiper/Washer
The first position after OFF is the
intermittent #1 cycle. The next
positions are intermittent #2, #3, and
#4. The last two positions are wiper
low speed and wiper high speed.
To Wash The Windshield
Push the rotary wash/wipe knob in
(towards steering column), hold for
more than 0.8 seconds and then
release. Hold the knob in to extend
the washing cycle. After the lever
is released, the wipers will shut off
automatically or resume the wiper’s
setting speed.
To activate the wipers for one swipe
without activating the washer (“mist”
function), push the turn signal lever
in (towards the steering column) and
release in less than 0.5 seconds. The
wipers will perform a single swipe and
then resume the wiper’s setting speed.
WARNING!
Clean blades regularly with a damp
cloth to remove road film and wax
build-up. Do not drive with worn or
dirty wiper blades. They can reduce
visibility, making driving hazardous
which may lead to an injury accident
resulting in death or personal injury.
CAUTION
Do not use antifreeze or engine
coolant in the windshield washer
reservoir - damage to seals and
other components will result.
(03/17) Y53-6076-1B1
3-67
3
https://www.besttruckmanuals.com/