Peter Lynn Twinskin, Руководство пользователя

Страница: 8 / 20

STEP 3. SETTING UP YOUR BAR AND LINES
Starting at the kite, unwind your flying lines while walking upwind backwards.
Place your bar on the ground the correct way around. Make sure your leader
lines and other parts of the bar are free of tangles or twists. Hold your lines
between your fingers while walking back toward the kite, to sort out the flying
lines. Make sure the lines are lying next to the kite, on the side of the trailing
edge.
To ensure that your lines are attached correctly, without twists or tangles, you can use the following method:
First attach the rear line to the
upwind tip. Now attach the top line to the
upwind tip, taking it
over the rear line
you have just attached.
Attach the rear line to the downwind
tip. You are now ready to move on to
the next step. Take the other top line and attach it
to the downwind tip, passing it over
the kite.
Attaching the top lines to the kite
Make sure you attach your lines using a larkshead knot. Place a larkshead
knot in the flying line connector, slide it over the knot on the end of the top line
attachment and tighten the larkshead as shown.
Attaching the rear lines to the kite
Connect the flying line connector to the rear line attachment and tighten the
larkshead as shown.
VPC SYSTEM
VPC SYSTEM
FLYING LINE
FLYING LINE
FLYING LINE
FLYING LINE
FLYING LINE
FLYING LINE
VPC SYSTEM
VPC SYSTEM
VPC SYSTEM
VPC SYSTEM