LandinG & PaCkinG uP
First check if the area is clear of
people. Fly the kite to the ground at
the edge of the wind window. Here
a helper may grab it, or you may let
go of the bar to activate the safety
system.
Secure it with some sand or other
suitable weight. Especially in strong
winds, a kite can easily take off again,
so make sure there is sufficient weight
and there is no tension on the flying
lines.
Wind the flying lines in figure-eights
onto the bar. When reaching the kite,
use the bungee chords to secure the
flying lines on the bar.
Secure the bridle loops and line
sleeves with the Velcro tag in the
centre of the leading edge.
Fold the kite, starting from the tips
towards the center. Now place the
control bar on the trailing edge, and
roll the kite around the control bar.
Place your kite in the bag to prevent it
from getting damaged.
rELaunChinG yOur kitE
After crashing your kite with its lead-
ing edge down, it is recommended to
unhook your harness loop.
You can relaunch it with the use of
the Life line. Pull the Life line and the
kite will fly up backwards.
Once it is in the air, pull in one side of
the bar. The kite will now turn around.
When the kite has completely turned
around, let go of the Life line and grab
the bar. You can now continue flying
your kite.
3-LinE traCtiOn kitE OnLy
Содержание 3 line bridled foil
Страница 1: ......
