Installing/Replacing the Battery:
Take off the battery cover and make sure you install the battery correctly.
Install the new battery between the "clip" and "spring" contacts. Note that "spring" contact is for
the negative end and "clip" contact is for the positive end shown below.
Putting Anti-bark Collar on Your Dog.
Place the unit around your dog's neck and adjust the collar length using the slide buckle
arrangement provides with the strap. The unit should fit snugly underneath your dog's neck.
Battery Cover
Slide Open
Make sure that the electrodes are in the direct contact with your dog's skin. Hair between the
electrodes and skin will severely diminish the shock effect, If necessary, it is advisable to clip or
shave your don's fur under the neck to insure direct contact.
Caution Notes:
1. Do not allow your dog to chew this collar. You should also attempt to minimize scratching or
clawing at the casing.
2. This device is made up of plastic and electronic components that are not digestible. Consult
your local vet if your dog swallows any part of this product.
3. The collar is not intended for use as a restraining collar. If you are using a leash, use it with a
separate restraining type of collar.
4. Although the Anti-bark Collar's microprocessor is designed to differentiate your dog's
individual bark from stray environmental noises, the unit may occasionally be activated by
other vibrations or sounds.
This is normal but, it should not happen so often as to be confusing to your pet. If the unit is falsely
triggered by excessive scratching, shaking of the head or rolling on the ground, your pet may be
suffering from fleas or ear mites. If these activities are evident, have you pet checked by a
veterinarian for parasites.
Shock Electrodes
Sensitivity Level Dial
High
Low
Indication Light
