To Test Petrainer Rechargeable and Waterproof
Training Collar:
The static impulse released by the Receiver Collar can not be seen
with naked eye. You can test the Stimulation by this way:
Test Static Shock Function
• Take out the test bulb from the
package and wind its metal wire
on the Receiver Collar's Contact
Points.
• Press Mode button of Remote
Transmitter, switch to Shock
Mode, confirm LCD display not
to be 0, you can press UP/DOWN
button on the right side to adjust.
• Press Y button, test bulb will flash,
that means Shock function works.
Test Vibration Function
• Press Mode button of Remote
Transmitter, switch to Vibrate
mode ,confirm LCD display not
to be 0, you can press UP/DOWN
button on the right side to adjust.
•
Press Y button, Remote Collar
will vibrate, that means Vibration
Function works.
Test Beep Function
• Press Mode button of Remote
Transmitter, switch to Beep Mode.
• Press Y button, Remote Collar
will beep,
that
means
Beep
Function works.
10
Test LED Light Function
• Press Mode button of Remote
Transmitter, switch to LED Light
Mode.
• Press Y button, Remote Collar
will flash, that means LED Light
Function works.
Note:
I:If LCD of Remote Transmitter does not display, there is probably two reasons:
1.Lightly Standby: In order to save power, the Remote Transmitter will go
into Standby Mode if there is no operation after 2 mintues, press any button
except LED Light Button can activate Remoter Transmitter, LCD will display.
2.Deeply Sleeping: In order to save power, the Remote Transmitter will go
into Deeply Sleep Mode if there is no operation after 5 minutes, hold Mode
button 5 seconds can activate the Remote Transmitter, LCD will display.
II:The receiver collar will go into deeply sleep if no operation for 5 minutes.
And any movement will activate the receiver.
If Receiver Collar has no respond when you press Y button, and Indicator
light of Receiver collar is not on either, you can shake Receiver Collar of let
dog move, Indication light of Receiver Collar will show green and means
Receiver Collar is activated and will work..
III:When test you can choose any mode except LED light, anyway when you
are under Vibration or Static Shock mode, Intensity Level can not be 0, you
can press UP/DOWN to adjust.
11
