❹
Instructions
Power On
Switch the power button to Power On and power indicator light turns on. (When
the vacuum function is not used, please switch the power button to Off.)
Uncap
Long press the button for 3 seconds to start exhaustion, which takes about 7
seconds to complete. After two “beep” sounds, the barrelhead turns to be
openable.
Charging
When flashes, the barrel is running low on power and needs charging as
soon as possible to keep the vacuum state. The battery indicator keeps flashing
while charging and will turn to white light on after charged.
Error
When flashes, the barrel is not able to accomplish vacuuming. Please do as
followed:
1. Check the edge of sealing ring and barrelhead to see if there’ s any foreign matter like food
residue;
2. Check the sealing ring, the barrelhead and barrel body to see if there’s any damage.
Vacuum
Place the barrelhead properly and the barrel
will start automatic vacuuming process after
a “beep” sound. It is needed that you help
pressing the barrelhead for 5 seconds.
During this process, the keeps flashing
and it indicates the barrel inside has reached
a vacuum state when the flashing stops.
After confirming that none of the above exists, restart the machine and proceed
vacuuming again.
If is still flashing, please contact Customer Service.
PS: It is needed that you help pressing the barrelhead for 5 seconds during the
vacuuming process.
