4
SPORTSTER Pet Stroller
PG8200
ASSEMBLING REAR WHEELS TO AXLE
ASSEMBLING REAR AXLE TO FRAME
4
Step 1.
Slide wheel assembly onto axle.
Step 2.
Slide washer onto axle.
Step 3.
Fit straight part of cotter pin through
hole on axle.
Step 4.
Line up each of the tabs in the hub
cap with the slots in the wheel, snap hub cap
into place.
Step 5.
Fit cover to collet by firmly pressing
the cover into place.
Step 6.
Push wheel hub cap onto the wheel
hub and make sure that the securing lugs
correctly locate into mating slots in wheel hub.
Step 7.
Repeat for other side.
Step 1.
Turn stroller over.
Step 2.
Position rear axle assembly as shown.
Step 3.
Push rear axle onto frame until it clicks and
locks into place on both sides.
NOTE: Pull down firmly on the brackets to be sure
they are securely attached to the stroller’s rear legs.
