SPORTSTER PET STROLLER • PG8200
4
Step 4. Line up each of the tabs in the hub cap with
the slots in the wheel, snap hub cap into place.
Step 5. Repeat for other side.
Step 1. Turn stroller over.
Step 2. Position rear axle assembly as shown.
Step 3. Push rear axle onto frame until it clicks and
locks into place on both sides.
NOTE: Pull down firmly on the brackets to be sure
they are securely attached to the stroller’s rear legs.
TO ASSEMBLE REAR WHEELS
TO ASSEMBLE REAR AXLE TO FRAME
Step 1. To assemble the back tray, first align a
hole on one side of the tray with one of the bolts
on the handle of the same side of the stroller.
Step 2. Snap one side of the tray over the bolt
on the handle then repeat for the other side.
TO ASSEMBLE BACK TRAY
