ASSEMBLY INSTRUCTIONS
4
AT3 GENERATION 2 All-Terrain Pet Stroller
PG8350
Step 1.
Push back wheels on to axle, as
shown in Figure A, until they clock into place.
To remove wheel, push the lock/release button
(Figure C) and pull wheel off.
Step 2.
Pull on wheel to make sure the wheel
is engaged. Repeat on other side. When
finished it should look like Figure B.
Figure C
Lock/Release Button
Back
Wheels
Inside
Outside
Shown with both back wheels in place.
Figure A
FOLDING STROLLER
Folding
Mechanism
Before folding the stroller close the canopy and unzip
stroller. Slide second frame lock release (H) to the right,
while squeezing the main frame lock release (G) rotate
the folding mechanism almost 180 degrees forward
untill stroller releases and handle is lowered to the rear
wheels. When closed, push folding lock (B) onto catch.
Step 1.
Before folding the stroller, close the canopy
and unzip stroller.
Step 2.
Slide second frame lock release (H) to the
right, while squeezing the main frame lock release
(G) rotate the folding mechanism almost 180
degrees forward until stroller releases and handle is
lowered to the rear wheels.
Step 3.
When closed, push folding lock (B) onto
catch.
Figure B
