Pet Gear PG8100NZ Скачать руководство пользователя страница 9

HAPPY TRAILS NO-ZIP PET STROLLER • PG8100NZ

LOOKING AFTER YOUR STROLLER

WHEEL MAINTENANCE

•  Always store product in a clean, dry place.
•  Not recommended for use on the beach.
•  Do not put heavy items on top of the stroller.
•  Clean frame by wiping with a lightly oiled cloth.
• 

 Do not use detergent or abrasives. Spot clean fabric with dry cleaning fluid or mild soap 

and warm water. 

•   To ensure easy maneuverability and to minimize wear and tear, (especially wheels, axles, 

and swivels), keep all moving parts clean and lubricated with WD40

®

 or light machine oil.

•  NOTE: Do not lubricate brake components or swivel locks.
•  Regularly check stroller for loose parts. These should be tightened or replaced.

•   To clean and lubricate front and rear wheels, push out locking lever under wheel housing 

to release rear wheel.

•   To ensure ease of maneuverability and to minimize wear and tear, keep all moving parts 

clean and lubricated with WD40

®

 or light machine oil.

•   Push wheel sets back on until they click and lock in position; pull on wheel housings to 

ensure they are secure.

•  Push stroller back and forth and rotate swivels around to work in lubricant.
•   Clean the rear wheel assembly and the rest of the frame with warm, soapy water; clean  

off with warm water and dry thoroughly.

•  NOTE: Do not lubricate brake components or swivel locks.

9

Содержание PG8100NZ











Отзывы: