3
PG8030DP
Step 1.
Release locking latch.
OPENING STROLLER
TO ASSEMBLE FRONT WHEELS
Step 2.
Unfold as shown. Make sure both locks
snap into place.
Step 1.
Turn stroller over as shown.
Step 2.
Push wheel assembly onto stroller leg until
it snaps into place.
Step 3.
Repeat for other wheel. Tug firmly
on each wheel assembly to be sure
wheels are securely in place.
NOTE: To remove, squeeze
tab and pull wheel off.
Note Direction of Arrow
OPENING THE STROLLER
TO ASSEMBLE REAR WHEELS
Step 1. Slide wheel assembly onto axle.
Step 2. Slide washer onto axle.
Step 3. Fit straight part of cotter pin through
hole on axle.
Step 4. Line up each of the tabs in the hub cap with
the slots in the wheel, snap hub cap into place.
Step 5. Repeat for other side.
Spread the canopy apart to the
open position.
Rear Axle Assembly