The carton containing your Fox Magnet will include the following items. Please check before
starting assembly.
1.
The main Fox Magnet Trap assembly (4 walls connected with hinges, with the floor
including treadle plate and plate arm).
2.
Rear Door assembly
3.
Front Door assembly
4.
Set (8) Split Pins
5.
Set (4) of replacement Spring Hinges
6.
Set (10) heavy-duty single use Cable Ties
7.
Fox Magnet Instruction Manual
How to Set Up Your Fox Magnet
1
Your trap has a series of Spring Hinges that are pre-
installed. These Spring Hinges will hold the four panels
together.
2
First task in assembling your Fox Magnet is to insert the
Treadle Plate Arm into the slot at the front of the roof
panel. Push in between this section as shown.
3
Ensure that the Treadle Plate Arm sits in this position
before further steps are taken. Then fold the trap into a box
shape.
