YOUR iMETOS 3.3 WiFi
The basic iMETOS consists of one stainless steel holder with the box
containing the electronics, the battery, the solar panel, the WiFi antenna
and one clamp for it. In the package with the iMETOS you will also find
two clamps to mount it on the pole. If you ordered a wind speed sensor
you will find the three cup wheels and the allen key to fix it to the axis
of the sensor; if you also ordered the wind direction sensor, you will find
a ”T” shaped holder with two clamps. Taped to the solar panel you will
find a sticker with the unique serial number and the keys that enable
the access to the
FieldClimate
platform.
MAIN VARIATIONS
• iMETOS IMT80 WiFi: Air Temperature sensor and Rain Gauge.
• iMETOS IMT200 WiFi: Sensors for the calculation of most Disease
Models: Air Temperature and Relative Humidity, Rain Gauge and
Leaf Wetness.
• iMETOS IMT280 WiFi: Rain Gauge and all the sensors for Evapotran-
spiration calculation: Air Temperature and Relative Humidity, Global
Radiation and Wind Speed.
• iMETOS IMT300 WiFi: Sensors for Evapotranspiration and Disease
Models calculation: Air Temperature and Relative Humidity, Rain
Gauge, Global Radiation, Wind Speed and Leaf Wetness.
START-UP THE iMETOS 3.3 WiFi
iMETOS 3.3 WiFi needs a WiFi access point. Ensure WiFi coverage of
your iMETOS by placing it where the WiFi router’s signal is strong
enough. A WiFi directional antenna with cable is included; make sure to
direct it to get a clear signal.
On picture:
iMETOS IMT280 WiFi
1. Temperature and relative humidity sensor with radiation shield; 2. Rain gauge;
3. Logger; 4. Global radiation sensor; 5. Power supply (solar panel and battery); 6.
WiFi external antenna.
5
3
2
6
4
1