Supported sensors:
List of supported sensors can be found on the
metos.at/nmetos
website.
START-UP THE nMETOS
By default, the nMETOS station comes with a disconnected battery and
based on your order, it can come with or without the SIM card.
To start up the nMETOS it requires opening the housing, optionally
inserting the SIM card and in special cases checking the settings via
the USB cable connected to the PC with the PI-Terminal/TeraTerm
application and connecting the battery.
To use the NB-IoT or CAT-M1 connectivity you need a SIM card which
is provisioned for the NB-IoT/Cat-M1 network from the network
provider and sufficient signal from the radio tower.
1. Carefully remove the board casing from the rain gauge.
2. Open the housing by unscrewing the 6 screws on the bottom.
3. Remove the board cover.
To use the NB-IoT connectivity, you need to have a micro-SIM card
which is provisioned for the NB-IoT network from the network
provider.
To insert a SIM card:
1. Slightly push the cover down
and towards the center of the
nMETOS board.
2. The cover should unlock, and
you can open it.