PESI WU221B, Руководство пользователя

Страница: 15 / 27

13
(i) Link Quality
Displays the quality of the wireless signal from 0 to 100%. The closer to
100%,
the better the link quality is. Link quality differs from signal strength by
measuring the actual quality of the signal. It is possible to have low
signal
strength and high link quality.
(j) Activate Profile Manager Mode
See the section called “Using Profile Manager Mode”.
(l) Exit Button
Click “Exit” to close the Wireless LAN Monitor Utility. To access the
utility again,
double-click on the “ “ icon in the bottom right corner of your screen.
USING THE BELKIN WIRELESS LAN MONITOR
UTILITY
14
The Statistics Tab
The “Statistics” tab shows you how much data has been sent and
received and if
any errors occurred. Click “Reset” (a) to start at zero. This screen is
mostly for
diagnostics. Note that the number of unsuccessful data and
management frames
is recorded. A large number of unsuccessful frames may indicate that
there is a
problem or interference in your area.
a
USING THE BELKIN WIRELESS LAN MONITOR
UTILITY
15
The Site Survey Tab
Clicking on the “Site Survey” tab will display a list of all available access
points
in your area. The following information about each is displayed:
(a) BSSID
The MAC address of the access point.