~ 11 ~
CHANNEL CONTROL
SOURCE SIDE
Method A: Push Button
1. Press the buttons on
OUTPUT PORT
to select which port to be changed.
“
«
”: change selected output port in ascending order
“
─
“: change selected output port in descending order
2. Press the buttons on
INPUT CHANNEL
. The source will be sequentially changed. After few
seconds, the setting will be active.
Method B: IR Remote Control
a.
Firstly please push one of the
INPUT
buttons to choose which HDMI input source you are
going to setup. After that, you can have multiple outputs playing the same content from the
selected
INPUT 1
to
INPUT 8
by pushing the corresponding
OUTPUT
buttons. The setting
will be effective in a couple of seconds.
INPUT & OUTPUT MAPPING
INPUT 1
HDMI input port 1
INPUT 2
HDMI input port 2
INPUT 3
HDMI input port 3
INPUT 4
HDMI input port 4
INPUT 5
HDMI input port 5
NPUT 6
HDMI input port 6
INPUT 7
HDMI input port 7
INPUT 8
HDMI input port 8
OUTPUT 1
HDMI output port 1
OUTPUT 2
HDMI output port 2
OUTPUT 3
HDMI output port 3
OUTPUT 4
HDMI output port 4
OUTPUT 5
HDMI output port 5
OUTPUT 6
HDMI output port 6
OUTPUT 7
HDMI output port 7
OUTPUT 8
HDMI output port 8
FUNCTION KEY
Function
FN
+
SOURCE SEL. 1
Escape System LOCK
FN
+
SOURCE SEL. 2
Enter System LOCK (most buttons, IR control, and RS-232 control
become inactive, except Escape System LOCK command )
